AZ-700 · Sample questions
10 real questions from the CertifyDeck AZ-700 bank, spread across the domains of the official Microsoft Certified: Azure Network Engineer Associate skills outline, with the correct answer and a full explanation of why the other options are wrong. They are original questions written from the public syllabus, not exam dumps, and they are the same style you will find in the practice tests and mock exams.
Correct answer: A. It is allowed and sent to the back end without managed rule evaluation
Custom rules are processed before the managed rule set and in priority order, where the lower integer wins, so allowPartner with priority 5 matches first. Once a custom rule matches, its action is applied and no lower-priority custom rules or managed rules are processed, so neither blockAdmin nor the SQL injection rule evaluates the request. There is no precedence of Block over Allow; only the priority value decides.
Correct answer: A. Run the WAF policy in Detection mode and collect the WAF log
Detection mode monitors and logs every threat alert without blocking requests, and Microsoft recommends running a new WAF in this mode for a short period so you can review the WAF log and add exclusions or custom rules before switching to Prevention mode. A custom Allow rule is evaluated before the managed rules and stops further evaluation, so you would see no managed rule matches at all; a disabled policy does not inspect or log traffic.
Correct answer: B. A Standard internal load balancer
A Private Link service is tied to a frontend IP configuration of a Standard Load Balancer, and consumer traffic for TCP port 5000 is then distributed to the backend VMs by load-balancing rules. The load balancer selection in a Private Link service references a Standard Load Balancer frontend, so an Application Gateway listener is not what the service is built on. NAT Gateway provides outbound connectivity only, and Traffic Manager is DNS-based and does not carry traffic.
Correct answer: C. Add virtual network links from the existing zone to Spoke1 and Spoke2
A private DNS zone answers only for virtual networks that are linked to it, so the same zone must be linked to every hub and spoke network whose clients need the private record. Creating zones with the same name in each spoke would require manual operations to merge records, which is why a single zone is required. Autoregistration registers VM records and gateway transit shares gateways; neither makes the spokes use the zone.
Correct answer: A. Set Connection Mode to ResponderOnly
Connection Mode applies to route-based gateways with IKEv2 connections and defines who starts the initial IKE connection; ResponderOnly means the connection must be initiated by the on-premises device. InitiatorOnly is the opposite, requiring Azure to initiate, and Default accepts whichever side connects first. Policy-based traffic selectors change how traffic selectors are proposed, and the DPD timeout controls dead peer detection, so neither controls the initiation direction.
Correct answer: C. Remove the gateway from VNet1, and then create the virtual network connection to Hub1.
A virtual network that connects to a Virtual WAN hub must not have its own VPN or ExpressRoute gateway, because the design requires virtual networks to use the hub gateway, so you remove the existing gateway first. Gateway transit to branches is enabled automatically in Virtual WAN, so there is nothing to enable on the connection. The hub assigns its own subnets automatically, and redeeming an authorization key on the VNet1 gateway keeps the old design instead of using the hub.
Correct answer: C. Create a new /30 prefix and create the addresses from it.
The size of a public IP prefix can't be modified after it's created, so the way to get another contiguous block is a second prefix, which the partner can allow as its one additional range. Only static Standard SKU addresses can be created from a prefix, and Prefix1 has no free addresses anyway. Individual static addresses created without a prefix come from the regional pool and aren't guaranteed to be contiguous, so they might not fit in a single new firewall range.
Correct answer: A. Run az network dns record-set a add-record -g RG1 -z adatum.com -n www -a 203.0.113.20.
Azure DNS groups all records with the same name and type into one record set, so you add the second address as another record in the existing www A record set, which az network dns record-set a add-record does; the TTL is set on the record set and applies to both records. A second A record set with the same name can't exist, and a CNAME record set can't coexist with other record sets of the same name. An alias A record set named www would also be a second A record set with that name.
Correct answer: A. An internal Standard load balancer with an HA ports load-balancing rule
An HA ports rule on an internal Standard load balancer balances all TCP and UDP flows on all ports, and it is the documented pattern for scaling NVAs in a hub with per-instance health probes, fast failover and n-active designs. HA ports rules are available only on internal load balancers, so a public load balancer cannot use them. Traffic Manager works through DNS and cannot be a next hop for routed traffic, and Application Gateway is a proxy for web traffic rather than a pass-through for every port.
Correct answer: A. Approve the pending private endpoint connection on the App Service app
When Private Link is enabled on an origin, Front Door creates a private endpoint in its own managed regional network and sends a connection request that must be approved at the origin before traffic can flow. Front Door manages that endpoint itself, so you don't create a private endpoint or a private DNS zone in your virtual network for this path. Turning off certificate subject name validation doesn't approve the pending connection, and it is required when Private Link is enabled on an origin.
Answer each question before opening the explanation, and write down why you discarded the other options. On AZ-700, most mistakes come from choosing an option that is technically possible but does not meet every requirement in the scenario.
These 10 questions are a taste of the format, not a diagnostic. To know which domains you fail, practice by domain for free and take a timed mock exam that mirrors the official weights and duration.
Start for free, no sign-up or card. Every question includes an explanation like the ones above, and the mock exam reproduces the official AZ-700 format.